Tools

Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position

Unior, Cartridge BB tool 20 tooth, Bottom Bracket Tool, Cartridge For: Shimano®, ISIS® Material: premium flex plus carbon steel

- Blade chrome plated, black anodised tip - Handle – polypropylene

- Quickly and accurately determine the wear and stretch of any chain

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.

Wrench for rear sprocket with handle is used for Shimano®, SRAM®, Sun Race®, Suntour® and other cassette sprockets.

Material: premium chrome vanadium steel

The single sided cone wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

Unior, Bracket Socket BBR60, Bottom Bracket Tool, BBR60 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Set includes 6 pcs of arm for inner bearing dimensions 6.5-8,10-12, 12-15, 17-20, 22-28, 30-36 Used for pulling different types of bearings. The bearing is gripped from the inside side and pulled out.

The head set cup remover makes removal of cups 1-1/4" and 1-1/2" from the frame quick and easy Suitable for removing PressFit 30 (PF30) bottom bracket cups. PF30 bottom bracket cups are pressed into the frame the same way as the head tube cups and have the same internal diameter.

Unior, Bracket Socket BSA30, Bottom Bracket Tool, BSA30 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Unior Fork Seal Driver

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

Two in one! Or six in three! We have three configurations of our double-sided spoke wrench to pick from. Similar in form to a traditional combination wrench, these spoke wrenches are great for the less common sizes you might run in to and allow you to be prepared while taking a minimum of space in your toolbox or work bench.

A handy tool to prevent spoke windup when working with bladed spokes Slots from 1.0mm-2.2mm for most spoke sizes

Modern replacement of the traditional chain whip Pins on the tool engage with the smallest sprocket on the cassette and hold it in place, while the opening in the middle allows for easy access to the cassette lockring

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

Four sided spoke nipple engagement means fewer rounded off nipples. Offered in two sizes: 3.3mm and 3.45mm to fit most common spoke nipples, the 1630/2P spoke wrench has a plastic dipped handle for comfort and ease of use.

The single sided headset wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

Three most popular TORX sizes: T10, T15 and T25mm

M10 - frame tap for derailleur hanger (616079) M5 - frame tap for water bottle, fender, rack bosses (616078) M3 - frame tap for rear wheel dropout alignment screws (616077)

- Includes drifts for most common bearing sizes - Organized storage in a plastic case with our laser-cut SOS foam tray - Combine with our Bearing Puller for the best bearing service kit in the business

Unior, Bracket Socket 16 Notch, Bottom Bracket Tool, Hollowtech II Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

The tool features an 8mm hex in the middle of it for those really stuck caps

This tool accurately presses headset cups 1”, 1-1/8”, 1-1/4 ” and 1-1/2” into head tubes. In addition it has a longer spindle for BMX headsets with larger tubing. This precision made tool enables work without damage.

Use in conjunction with our Star Nut Setter to ensure the star nut is driven in straight. Compatible with 1" and 1 1/8" steerers.

Unior, Bracket Socket BB9000, Bottom Bracket Tool, BB-9000 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Compatible with our Professional Chain Tool and the new Master Chain Tool