Your Search: "bike rack"

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

Available in white (3339WH) and gloss black (3339GB) powder coat finishes - Made in U.S.A. (Maysville, KY) - Dimensions: 14.5 x 9.5 x 9 inches (1.25-inch rail on all sides - Two-piece adjustable legs extend from 14" to 22" and mount to either front axle or fork eyelets on bikes with quick release front hubs - Extended handlebar clamps allow greater clearance for shift and brake cables - Handlebar clamps are enlarged to fit 1 1/4", 1" or 7/8" OD handlebars - Rack is furnished with metric fasteners - Combo comes with a Wald 3133 quick release basket (dimensions: 14.5 x 9.5 x 9 inches; tapering to 12.25 x 7 inches) - Basket nests in the rack and locks into place - Lift the handle to release the basket and take it with you - Complete rack and basket combo weighs 4.8 lbs. each

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender as well as a spring-loaded bar to hold down your belongings.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

Listen to your inner voice of adventure. Pack up your gear, get on your bike, and ride that epic trail. BackLoader is a large-capacity seat bag specially designed for bikepackers providing a streamlined way to carry gear without the need for a rear rack. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly. The upgraded saddle mount system, in conjunction with compression straps, reduces the pendulum effect associated with large rear payloads, providing a comfortable ride for those long miles. An easy-access waterproof inner bag is included to keep contents completely dry. - Polyethylene / Nylon — Lightweight, durable, water repellent and stain resistant - Hook and loop fastener - Waterproof Rating: 10,000mm (waterproof inner bag) - Max Load: 5kg / 11lb - Safety light clip - Air release button

The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb

Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

Modifies women's bike frames as well as BMX and non-standard frames to be carried on a hanging-style hitch and strap mount bike racks. Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX, and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely. Features: - Telescopic adjustment (18" - 30.5”) fits most bike frames - New push button clamps for quick installation and removal - Molded rubber pads protect the bike finish - Thule Frame Adapter 982XT - Keeps bike securely centered and mounted on hanging-style rear mounts - Durable rubber collars secure easily and safely to bike stem and seat post

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Secure and easy-to-use roof-mounted front wheel holder keeps muddy and bulky wheel out of the trunk. - Fits quick-release wheels out of the box and thru-axle wheels with adapter accessory - Fits all wheels from 20" up to 29" and tire size up to 3" - Fits 9mm quick-release bikes - Fits 12-20mm thru-axle bikes with adapter accessory (adapter sold as an accessory) - Holder arm can be separated from the base for convenient loading of the front wheel off the car - Holder arm with the wheel installed easily docks to the base - Locks the front wheel to the holder and the holder to the roof rack (locks included) - Ability to fold flat when not in use - Fits most roof racks up to 90mm by around-the-bar solution including Thule SquareBar roof rack with included adapter

Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points or factory-installed racks. Features - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car Fits Cars CHEVROLET - Spark 5-dr Hatchback with Normal Roof 2013 - 2015 - Spark 5-dr Hatchback with Normal Roof 2016 - 2020

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars BMW - X1 5-dr SUV with Normal Roof 2016 - 2019